Turbosaw Tractor Tree Saw Attachment

Home/Turbosaw Tractor Tree Saw Attachment

TRACTOR TREE & BRUSH CUTTERS FOR FARMS & RANCHES

Turbosaw Overview

The TR Series Models are ideal maintenance tool for land owners to remove invasive trees. This high-speed saw cuts 11″ in a single pass, up to a 22″ tree with repositioning. The PTO powered cutting disc will cut as fast as an operator can back up. The LT3200 is equipped with a pushing bar to direct the fall of trees away from the operator, while the TR3200 has a hydraulic grapples that can carry and stack trees.

The LT3200 can operate on tractors with 28-70 hp and the TR3200 can operate on 28-120 hp. On a 540 rpm PTO, the cutting disc turns at 1,100 rpm cutting up to 6″ per second. The mining grade carbide teeth can contact the dirt to ensure a smooth, below ground stump..

» Place An Order

1 Year Frame & Component Warranty

Every DFM product is built to tackle the heaviest workload, and every product is covered by a 1-year frame and component warranty. Under this warranty, DFM will repair or replace (at its option) any covered part which is found to be defective in material or workmanship. Warranty covers non-wear items such as hydraulic motors, valves, cylinders, and gearbox motors.
» Place An Order

Turbosaw Specifications

Turbosaw – LT3200 | $4,700 + Freight/Tax

Tractor HP: 28+
3-Point Hitch: Category I & II
PTO RPMs: 540 RPMs
PTO HP: up to 70 HP
Cutting Rate: 3″ – 6″ per second
Blade Diameter: 32″
Blade Thickness: 1/2″
No. of Teeth: 10
Length: 65″
Width: 35″
Height: 25″
Weight: 625 lbs
Included Items: PTO w/slip clutch
Category I & II Pins
Operator Manual

Turbosaw – TR3200 | $5,900 + Freight/Tax

Tractor HP: 28+
3-Point Hitch: Category I & II
PTO RPMs: 540 RPMs
PTO HP: up to 70 HP
Cutting Rate: 3″ – 6″ per second
Blade Diameter: 32″
Blade Thickness: 1/2″
No. of Teeth: 10
Length: 65″
Width: 35″
Height: 25″
Weight: 810 lbs
Included Items: PTO w/slip clutch
Category I & II Pins
Operator Manual
1/2″ Pioneer Couplers
Hydraulic Hoses
» Request a Brochure

Want a brochure or spec sheet?

If you'd like us to email you a spec-sheet and brochure - click the button on the right and fill out the form and we'll send it right over.
» Request a Brochure

Standard Features



The PTO shaft is included with every Tractor Saw. Usually, the blade will cut as fast as an operator can back up. In case the saw is crowded out, a rugged slip clutch protects the tractor and the saw.



The Turbo Saw™ Tractor Saw has a heavy duty gearbox designed to withstand use in the forestry industry. The gearbox has a 1 year, unlimited hour warranty.



The TS3 Cutting System consist of a 4 sided, bolt-on, mining grade, carbide cutting tooth that can be rotated after wear to a sharper edge.



The cutting disc on the Turbo Saw™ Tractor Saw turns 1,100 rpm. The teeth move at a high speed making a smaller bite minimizing flying debris while multiplying available power and increasing efficiency. The high speed cutting disc also allows the operator to cut brush as well as trees.



Safety is a primary concern of Dougherty Forestry MFG and each Turbo Saw™ Tractor Saw has more standard safety features than the competition.



The Tractor Saw comes with Category I and II 3-point pins.

error: Content is protected !!