Turbo Saw Tractor Unit

The Turbo Saw tractor unit is an ideal maintenance tool for land owners to remove invasive trees. The PTO-powered cutting disc will cut as fast as an operator can back up. There are two tractor models: the TR3200 with Grapple, and the LT3200 with Push Bar. Using a high-speed circular disc with durable carbide cutting teeth, the Turbo Saw Tractor Models can operate on tractors with 28-120 hp. On a 540 rpm PTO, the disc turns at 1,080 rpm cutting 3 to 6” per second. The mining-grade carbide teeth can contact the ground to ensure a smooth ground-level stump.

LT3200 Tractor Saw

Turbosaw

Designed For – Tractors (28+ hp)
3-Point –  Category I & II
PTO 540 RPM – HP to 70HP
Cutting Rate  – 3 – 6” per second

Blade Specs –
• Blade Diameter – 32″
• Thickness – 1/2″
• Num. of Teeth – 10

Dimensions
• Length: 65″
• Width: 35″
• Height: 25″

Weight – 625 lbs

Included Items
• PTO w/ Slip Clutch
• Cat. I and II Pins
• Operator’s Manual

TR3200 Tractor Saw

Turbosaw

Designed For – Tractors (28+ hp)
3-Point –  Category I & II
PTO 540 RPM – HP to 70HP
Cutting Rate  – 3 – 6” per second

Blade Specs –
• Blade Diameter – 32″
• Thickness – 1/2″
• Num. of Teeth – 10

Dimensions
• Length: 65″
• Width: 35″
• Height: 25″

Weight – 625 lbs

Included Items
• PTO w/ Slip Clutch
• Cat. I and II Pins
• Operator’s Manual

 

 

Turbosaw Specifications:

Turbosaw LT3200

Turbosaw – LT3200 

Tractor HP: 28+
3-Point Hitch: Category I & II
PTO RPMs: 540 RPMs
PTO HP: up to 70 HP
Cutting Rate: 3″ – 6″ per second
Blade Diameter: 32″
Blade Thickness: 1/2″
No. of Teeth: 10
Length: 65″
Width: 35″
Height: 25″
Weight: 625 lbs
Included Items: PTO w/slip clutch
Category I & II Pins
Operator Manual

Tree Saw with Grapple

Turbosaw – TR3200

Tractor HP: 28+
3-Point Hitch: Category I & II
PTO RPMs: 540 RPMs
PTO HP: up to 70 HP
Cutting Rate: 3″ – 6″ per second
Blade Diameter: 32″
Blade Thickness: 1/2″
No. of Teeth: 10
Length: 65″
Width: 35″
Height: 25″
Weight: 810 lbs
Included Items: PTO w/slip clutch
Category I & II Pins
Operator Manual
1/2″ Pioneer Couplers
Hydraulic Hoses


1 Year Frame & Component Warranty

Every DFM product is built to tackle the heaviest workload, and every product is covered by a 1-year frame and component warranty. Under this warranty, DFM will repair or replace (at its option) any covered part which is found to be defective in material or workmanship. Warranty covers non-wear items such as hydraulic motors, valves, cylinders, and gearbox motors.


Turbosaw PTO

The PTO shaft is included with every Tractor Saw. Usually, the blade will cut as fast as an operator can back up. In case the saw is crowded out, a rugged slip clutch protects the tractor and the saw.

Turbosaw Gear Box

The Turbo Saw™ Tractor Saw has a heavy duty gearbox designed to withstand use in the forestry industry. The gearbox has a 1 year, unlimited hour warranty.

Tree Saw Blade

The TS3 Cutting System consist of a 4 sided, bolt-on, mining grade, carbide cutting tooth that can be rotated after wear to a sharper edge.

Tree Saw Cutting Disc

The cutting disc on the Turbo Saw™ Tractor Saw turns 1,100 rpm. The teeth move at a high speed making a smaller bite minimizing flying debris while multiplying available power and increasing efficiency. The high speed cutting disc also allows the operator to cut brush as well as trees.

Tree Saw Blade Shield

Safety is a primary concern of Dougherty Forestry MFG and each Turbo Saw™ Tractor Saw has more standard safety features than the competition.

Turbosaw Connection

The Tractor Saw comes with Category I and II 3-point pins

Request A Quote

Request A Quote

Service Request