ePicker Electric Access Vehicle JX0-118
The ePicker JX0-118 Electric Access Vehicle is a compact and flexible solution for environments looking to replace ladders and improve productivity. With a carrying capacity of over 200 lbs. on the powered front load tray
- Permanent magnet DC drive motor delivers run times of up to 4 hours of continuous operation on a single charge through a ZAPI 24v infinitely variable travel controller.
- The hydraulic pump and reservoir are fully enclosed within the powerhead to reduce chances for leakage
- Lifts the operator to a maximum elevation of 118″.
- Unit includes a powered front load tray with a carrying capacity of 200 lbs.
- An all steel chassis supports good stability at height while loaded, and exceptional durability to extend the equipment’s service life
- The spacious 24″ x 24″ clear cabin area is fully enclosed by an automatic locking rear entry gate. Operator presence sensors include a foot switch and right hand sensor.
- The right-hand operator control pod features fingertip lift/lower buttons for the operator platform, front load tray, horn, and travel.
STANDARD FEATURES
- Powered front load tray
- Electronic power steering
- Forward facing blue light
- Rear flashing warning light
- Battery discharge indicator w/hour meter
- Accessory bars and file pouch
- Cushioned floor mat and mast cap
- Integral 24v battery and 110v charger
- Key switch, horn, emergency power disconnect, slope alarm, stability tabs
The ePicker Electric Access Vehicle JX0-118  is ideal for warehouse use, eCommerce, retail operations, and other industrial and commercial applications.
Designed for operator comfort, accurate steering, and operator safety, the JX0-118 features easy-to-learn controls. Planning to replace ladders in your facility with a safer, more productive alternative? Â
 Contact your ePicker dealer today for more information or to schedule a demo of the JX0-118 at your facility.
Capacity
200 lbs. Front load tray
250 lbs. Front load deck
300 lbs. Operator compartment
Tires/Wheels
An electro-mechanical brake is located on the front drive wheel. (2) Front mounted polyurethane caster wheels are adjacent.
Drive tires:Â 8.3″ x 2.8″ polyurethane
Rear tires:Â 9.8″ x 3.9″ non-marking rubber
Battery and Charger
(2) 12v 120AH AGM maintenance free batteries are located in the lower chassis. Integral 110 VAC smart charger @15A.
- Audible back-up or travel alarm
- Plexiglass insert for front load tray
- Rail guidance
DESCRIPTION
Drive Motor
Permanent magnet DC drive motor delivers run times of up to 4 hours of continuous operation on a single charge through a ZAPI 24v infinitely variable travel controller. Travel speeds are automatically reduced when elevated or tightly turning.
Hydraulic and Pump Resevoir
The hydraulic pump and reservoir are fully enclosed within the powerhead to reduce chances for leakage when used in a commercial environment and lowering valve is located on the chassis should the unit ever become stuck in the air.
DC Lift Motor
Lifts the operator to a maximum elevation of 118″.
Elevating System
I-beam mast design with dual lifting chains ensures solid stability characteristics at height.
Powered Front Load Tray
Unit includes a powered front load tray with a carrying capacity of 200 lbs. The lifting cylinder used to elevate the tray is shielded with an angled cover to protect it and items on the lower load deck from damage.
Front load tray dimensions
29″ x 21″ (Lowers 19″ from maximum)
Front load deck dimensions
29″ x 21″ (Chassis, does not elevate)
The front load deck features a single piece rubber powerhead cover that may be removed with simple hand tools to access the unit’s mechanical, battery and charger systems for any required maintenance.
Chassis
An all steel chassis supports good stability at height while loaded, and exceptional durability to extend the equipment’s service life. A forward facing blue light and rear flashing warning light are included as is an emergency power disconnect.
Operator Compartment
The spacious 24″ x 24″ clear cabin area is fully enclosed by an automatic locking rear entry gate. Operator presence sensors include a foot switch and right hand sensor. The operator’s compartment features a low 11″ step height, 42″ high railings, and colored side panels. The compartment floor, rear gates and mast cap are cushioned for operator comfort. Obstruction presence sensors are included below the operator’s compartment on the lower chassis.
Operator Controls
The right-hand operator control pod features fingertip lift/lower buttons for the operator platform, front load tray, horn, and travel. Also included is a recessed emergency power disconnect. On the left-hand control pod, the steering tiller, battery discharge indicator with hour meter and key switch are provided.